Product
Description
Standard
Comments
UVA 69600 PC BLUE & DIFFUSER Contains extra UV protection and based on a very fine polymeric sphere as the anti-glare agent. This product provides very good AG properties, but with milky effect on the sheet surface. High thermal stability.

Cap layer compound

UVA 6C670 PC BLUE & DIFFUSER Contains standard UV protection and based on a very fine polymeric sphere as the anti-glare agent. This product provides very good AG properties, but with milky effect on the sheet surface. High thermal stability.

Cap layer compound

UVA 60D23 PC BLUISH & ANTIGLARE Contains standard UV protection. Provides a very good AG property and has a natural color (no milky effect). With medium surface roughness, this product's main drawback is the limited thermal stability - maximum processing Temp. is 270°C.

Cap layer compound

CB 6C230 PC UVA & ANTIGLARE BLUISH Contains standard UV protection. This product provides a very good AG property and has a natural color (no milky effect). With fine surface roughness, this product's main drawback is the limited thermal stability - maximum processing Temp. is 270°C.

Cap layer compound

UVA 60F66I PC BLUISH & ANTIGLARE With standard UV protection, this product provides a very good AG property and has a natural color (no milky effect). With a very rough surface, this product's main drawback is the limited thermal stability - maximum processing Temp. is 270°C.

Cap layer compound

The purpose of this product group is to eliminate the sheets glossy surface appearance.  As this is a surface “problem”, the AG products are always combined with UVA and applied to the sheets in the same manner as the UV Cap Layers. The obtained effect can also be referred to as a “matt-effect”. The AG products are based on cross linked polymeric spheres (similar to the light diffuser additives) that create a kind of micro-structure on the surface and as such interfere with the glossy appearance.  The AG products contain different types of polymeric spheres, with different diameters.  Both parameters are very important factors in the AG's performance, appearance and processability. It is recommended to apply the AG compounds at a layer thickness of 40-50µ to get the best effect.